UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20480
                        
                            Issued:1986-06-17
                    
                            Revised:2012-03-21
                    
                            Style
                            20480
                        
                            Parallel Cable with Extruded Non-Integral Jacket
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			ConductorSolid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM procedure, 6 mils minimum average thickness.
		
			AssemblyTwo or more singles, or groups of insulated singles twisted together. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size. Twisted singles, with or without covering and shield, laid in parallel. Maximum diameter of conductor assembly, 1.0 inch, maximum width of cable, 10.0 inches.
		
			ShieldOptional.
		
			CoveringOptional - A 10 mil thick or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded PVC
		
			Thickness before ripping
		
			Major Diameter of Cable in inchesAverage minimum thickness in milsMinimum thickness at any point in mils
		
			0.700 inches or less3024
		
			0.701-1.0004536
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of external interconnection of electronic equipment (such as desk-type calculators dictating machines, or X-Ray equipment).
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20480	Issued:1986-06-17
			Revised:2012-03-21


Rating	80 deg C, 300 Vac, Horizontal flame.

Conductor	Solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM procedure, 6 mils minimum average thickness.

Assembly	Two or more singles, or groups of insulated singles twisted together. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size. Twisted singles, with or without covering and shield, laid in parallel. Maximum diameter of conductor assembly, 1.0 inch, maximum width of cable, 10.0 inches.

Shield	Optional.

Covering	Optional - A 10 mil thick or heavier PVC covering may be extruded over the conductor assembly.

Jacket	Extruded PVC
	Thickness before ripping
	Major Diameter of Cable in inches	Average minimum thickness in mils	Minimum thickness at any point in mils
	0.700 inches or less	30	24
	0.701-1.000	45	36

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of external interconnection of electronic equipment (such as desk-type calculators dictating machines, or X-Ray equipment).