UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20481
                        
                            Issued:1986-06-17
                    
                            Revised:2011-10-09
                    
                            Style
                            20481
                        
                            Multi-conductor Cable with Extruded Non-Integral Jacket.
                    
			Rating60 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG minimum.
		
			InsulationUse No. 1A and 1B - Material not specified.  Use No. 2A and 2B - Labeled or complies with manufacturer's Procedure.
		
			AssemblyTwo or more insulated singles or groups of insulated singles twisted together.  Lay not specified.  Barrier layer and/or fillers optional.  Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.  May be over one or more of the insulated conductors or applied over the assembly.
		
			FillerOptional.
		
			CoveringOptional.  Extruded PVC, 5 mils minimum thickness at any point.
		
			JacketExtruded PVC
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.250 inches or less15 mils12 mils
		
			0.251-0.424 inches30 mils27 mils
		
			0.425-0.700 inches60 mils48 mils
		
			0.701-1.000 inches80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseUse No. 1A - Internal wiring in Class 2 circuits of electronic equipment where each end is terminated in connectors. or Use No. 1B - Cables using 30 mils or greater jacket thickness only: external interconnection or internal wiring in Class 2 circuits of electronic equipment where each end is terminated in connectors. Use No. 2A - Internal wiring in Class 2 circuits of electronic equipment or external interconnection in Class 2 circuits of electronic equipment where not routed along walls, floors, or other abuse areas. or Use No. 2B - Cables using 30 mils or greater jacket thickness only: external interconnection or internal wiring in Class 2 circuits of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20481	Issued:1986-06-17
			Revised:2011-10-09


Rating	60 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG minimum.

Insulation	Use No. 1A and 1B - Material not specified. Use No. 2A and 2B - Labeled or complies with manufacturer's Procedure.

Assembly	Two or more insulated singles or groups of insulated singles twisted together. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional. May be over one or more of the insulated conductors or applied over the assembly.

Filler	Optional.

Covering	Optional. Extruded PVC, 5 mils minimum thickness at any point.

Jacket	Extruded PVC
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.250 inches or less	15 mils	12 mils
	0.251-0.424 inches	30 mils	27 mils
	0.425-0.700 inches	60 mils	48 mils
	0.701-1.000 inches	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Use No. 1A - Internal wiring in Class 2 circuits of electronic equipment where each end is terminated in connectors. or Use No. 1B - Cables using 30 mils or greater jacket thickness only: external interconnection or internal wiring in Class 2 circuits of electronic equipment where each end is terminated in connectors. Use No. 2A - Internal wiring in Class 2 circuits of electronic equipment or external interconnection in Class 2 circuits of electronic equipment where not routed along walls, floors, or other abuse areas. or Use No. 2B - Cables using 30 mils or greater jacket thickness only: external interconnection or internal wiring in Class 2 circuits of electronic equipment.