UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20483
                        
                            Issued:1986-06-24
                    
                            Revised:2013-01-24
                    
                            Style
                            20483
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, 30 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more singles, twisted pairs or groups of twisted singles cabled together or groups may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional, extruded PVC, 10 mils minimum thickness at any point, over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded SRPVC.
		
			Diameter of cable under jacketMinimum average thicknessMinimum thickness at any point
		
			0.425 inches25 mils20 mils
		
			0.426-0.700 inch30 mils24 mils
		
			0.701-1.000 inch40 mils36 mils
		
			1.001-1.500 inch50 mils40 mils
		
			1.501-2.500 inch60 mils48 mils
		
			2.501 inch and larger80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20483	Issued:1986-06-24
			Revised:2013-01-24


Rating	60 deg C, 30 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more singles, twisted pairs or groups of twisted singles cabled together or groups may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional, extruded PVC, 10 mils minimum thickness at any point, over the conductor assembly.

Shield	Optional.

Jacket	Extruded SRPVC.
	Diameter of cable under jacket	Minimum average thickness	Minimum thickness at any point
	0.425 inches	25 mils	20 mils
	0.426-0.700 inch	30 mils	24 mils
	0.701-1.000 inch	40 mils	36 mils
	1.001-1.500 inch	50 mils	40 mils
	1.501-2.500 inch	60 mils	48 mils
	2.501 inch and larger	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of electronic equipment.