UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20491
                        
                            Issued:1986-10-30
                    
                            Revised:2012-04-13
                    
                            Style
                            20491
                        
                            laminated flat ribbon cable
                    
			Rating80 deg C, 125 Vac
		
			Conductor36 AWG - 22 AWG solid or stranded round, tinned or bare copper.
		
			Insulationextruded PTFE, TFE, 5 mils min average, 4 mils min at any point, or flat cable complying with Manufacturer's AWM Procedure.
		
			AssemblyTwo through eighty conductors laid parallel and in one plane. Adjacent ground conductors may touch. Optional, two to six conductor groups may be laid parallel on top of each other. Insulation is built with a separator, insulate, Inner barrier layer, optional, shield (optional), outer barrier layer (optional), and jacket.
		
			ShieldOptional.
		
			JacketExtruded PUR, 17 mils min average, 14 mils minimum at any point.
		
			Misc.Separator - Optional - Expanded PTFE tape. Inner Barrier Layer, Optional, expanded PTFE or polyester tape between insulated conductors and shield. Outer Barrier Layer, Optional - Expanded PTFE or polyester tape.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20491	Issued:1986-10-30
			Revised:2012-04-13


Rating	80 deg C, 125 Vac

Conductor	36 AWG - 22 AWG solid or stranded round, tinned or bare copper.

Insulation	extruded PTFE, TFE, 5 mils min average, 4 mils min at any point, or flat cable complying with Manufacturer's AWM Procedure.

Assembly	Two through eighty conductors laid parallel and in one plane. Adjacent ground conductors may touch. Optional, two to six conductor groups may be laid parallel on top of each other. Insulation is built with a separator, insulate, Inner barrier layer, optional, shield (optional), outer barrier layer (optional), and jacket.

Shield	Optional.

Jacket	Extruded PUR, 17 mils min average, 14 mils minimum at any point.

Misc.	Separator - Optional - Expanded PTFE tape. Inner Barrier Layer, Optional, expanded PTFE or polyester tape between insulated conductors and shield. Outer Barrier Layer, Optional - Expanded PTFE or polyester tape.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.