UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2050
                        
                            Issued:1959-05-01
                    
                            Revised:2011-10-04
                    
                            Style
                            2050
                        
                            Parallel Cable with Extruded Insulation.
                    
			Rating90 deg C, 300 Vac, FT2 Horizontal flame.  Optional - 60 or 80 deg C Oil.
		
			Conductor18 AWG stranded, consisting of No. 30 AWG or smaller strands.
		
			InsulationExtruded PVC, 28 mils minimum thickness at any point.
		
			AssemblyThree conductors, similar to SPT-1 except for a nominal 80 mil separation between conductors.  The following minimum (pin gauge) dimensions shall apply: Wall thickness: 28 mils; Web thickness: 70 mils; Wall thickness after rip: 28 mils.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electric refrigerators where installed within separate metal enclosures or between walls of the cabinet.  Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2050	Issued:1959-05-01
			Revised:2011-10-04


Rating	90 deg C, 300 Vac, FT2 Horizontal flame. Optional - 60 or 80 deg C Oil.

Conductor	18 AWG stranded, consisting of No. 30 AWG or smaller strands.

Insulation	Extruded PVC, 28 mils minimum thickness at any point.

Assembly	Three conductors, similar to SPT-1 except for a nominal 80 mil separation between conductors. The following minimum (pin gauge) dimensions shall apply: Wall thickness: 28 mils; Web thickness: 70 mils; Wall thickness after rip: 28 mils.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electric refrigerators where installed within separate metal enclosures or between walls of the cabinet. Polarity identification may be omitted.