UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20504
                        
                            Issued:1986-11-13
                    
                            Revised:2012-06-08
                    
                            Style
                            20504
                        
                            Multiple-conductor cable using non-integral jacketed flat cable
                    
			Rating200 deg C, 30 Vac, Horizontal flame.
		
			Conductor32 AWG - 22 AWG, solid or stranded round.
		
			SeparatorOptional - Expanded PTFE tape.
		
			InsulationExtruded PTFE, 2 mils min at any point and/or Labeled or complies with Manufacturer's AWM Procedure.
		
			Assembly2 - 80 conductors laid parallel and in one plane. Adjacent ground conductor may touch. 1 - 6 conductor groups may be laid parallel and placed on top of each other.
		
			Barrier LayerOptional - Expanded PTFE tape.
		
			ShieldOptional.
		
			Barrier LayerOptional - Expanded PTFE tape.
		
			JacketExtruded FEP, 10 mils minimum average, 8 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20504	Issued:1986-11-13
			Revised:2012-06-08


Rating	200 deg C, 30 Vac, Horizontal flame.

Conductor	32 AWG - 22 AWG, solid or stranded round.

Separator	Optional - Expanded PTFE tape.

Insulation	Extruded PTFE, 2 mils min at any point and/or Labeled or complies with Manufacturer's AWM Procedure.

Assembly	2 - 80 conductors laid parallel and in one plane. Adjacent ground conductor may touch. 1 - 6 conductor groups may be laid parallel and placed on top of each other.

Barrier Layer	Optional - Expanded PTFE tape.

Shield	Optional.

Barrier Layer	Optional - Expanded PTFE tape.

Jacket	Extruded FEP, 10 mils minimum average, 8 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.