UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20508
                        
                            Issued:1986-11-13
                    
                            Revised:2012-07-24
                    
                            Style
                            20508
                        
                            Multiple conductor cable using non-integral jacket
                    
			Rating90 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG minimum, material not specified,
		
			InsulationSolid or cellular ETFE or FEP or PET, PETP or PFA or POLYESTER or POLYIMIDE or PTFE, TFE or PVC, 4 mils min average, min. wall at any point 3 mils.
		
			AssemblyTwo to ten conductors
		
			ShieldOptional, over and under jacket.
		
			CoveringOptional over outer shield - PTFE, FEP, ETFE, PVC or PFA min. wall at any point, 2 mils or PETP with a PVC orpolyester adhesive (Milene) min. wall at any point 2 mils.
		
			JacketETFE or FEP or PFA or PTFE, TFE, 3 mils min average, 2 mils or PETP with a PVC or polyester adhesive (Milene) min. wall at any point 2 mils.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20508	Issued:1986-11-13
			Revised:2012-07-24


Rating	90 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG minimum, material not specified,

Insulation	Solid or cellular ETFE or FEP or PET, PETP or PFA or POLYESTER or POLYIMIDE or PTFE, TFE or PVC, 4 mils min average, min. wall at any point 3 mils.

Assembly	Two to ten conductors

Shield	Optional, over and under jacket.

Covering	Optional over outer shield - PTFE, FEP, ETFE, PVC or PFA min. wall at any point, 2 mils or PETP with a PVC orpolyester adhesive (Milene) min. wall at any point 2 mils.

Jacket	ETFE or FEP or PFA or PTFE, TFE, 3 mils min average, 2 mils or PETP with a PVC or polyester adhesive (Milene) min. wall at any point 2 mils.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.