UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2051
                        
                            Issued:1959-05-01
                    
                            Revised:2011-12-02
                    
                            Style
                            2051
                        
                            Parallel cable with extruded integral insulation
                    
			Rating60 deg C, 300 Vac, FT2 flame.
		
			ConductorFour No. 14 AWG consisting of No. 30 AWG or smaller tinned or bare copper.

			InsulationIntegral with Jacket. PVC, 28 mils min average, 25 mils minimum at any point.
		
			AssemblyFour conductor, same as type SPT-1 except for a nominal 80 mil separation between conductors. The following minimum (pin gauge) dimensions shall apply: Wall thickness: 0.028 in., Web thickness: 0.070 in., Wall after rip: 0.028 in.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electric refrigerators where installed within separate metal enclosures or between the walls of the cabinet. Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2051	Issued:1959-05-01
			Revised:2011-12-02


Rating	60 deg C, 300 Vac, FT2 flame.

Conductor	Four No. 14 AWG consisting of No. 30 AWG or smaller tinned or bare copper.

Insulation	Integral with Jacket. PVC, 28 mils min average, 25 mils minimum at any point.

Assembly	Four conductor, same as type SPT-1 except for a nominal 80 mil separation between conductors. The following minimum (pin gauge) dimensions shall apply: Wall thickness: 0.028 in., Web thickness: 0.070 in., Wall after rip: 0.028 in.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electric refrigerators where installed within separate metal enclosures or between the walls of the cabinet. Polarity identification may be omitted.