UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20510
                        
                            Issued:1986-12-22
                    
                            Revised:2012-04-26
                    
                            Style
                            20510
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating80 deg C, 30 Vac, Cable flame.
		
			Conductor36 AWG - 22 AWG solid or stranded round.
		
			InsulationExtruded PTFE, Extruded TFE, 3 mils minimum average thickness, 2 mils minimum thickness at any point; or flat cable complying with Manufacturer's AWM Procedure.
		
			AssemblyTwo through eighty conductors laid parallel and in one plane. Adjacent ground conductors may touch. Optional, Two to six conductor groups may be laid parallel on top of each other. Insulation is built with a separator (optional), insulate, inner barrier layer (optional), shield (optional) and outer barrier layer (optional).
		
			ShieldOptional.
		
			CoveringInner layer (optional), expanded PTFE or polyester tape between insulated conductors and shield. Outer barrier (optional), expanded PTFE or polyester tape.
		
			BraidOptional.
		
			JacketExtruded PUR, 15 mils minimum average thickness, 12 mils minimum thickness at any point.
		
			Misc.Separator, over conductor - Optional, Expanded PTFE tape.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20510	Issued:1986-12-22
			Revised:2012-04-26


Rating	80 deg C, 30 Vac, Cable flame.

Conductor	36 AWG - 22 AWG solid or stranded round.

Insulation	Extruded PTFE, Extruded TFE, 3 mils minimum average thickness, 2 mils minimum thickness at any point; or flat cable complying with Manufacturer's AWM Procedure.

Assembly	Two through eighty conductors laid parallel and in one plane. Adjacent ground conductors may touch. Optional, Two to six conductor groups may be laid parallel on top of each other. Insulation is built with a separator (optional), insulate, inner barrier layer (optional), shield (optional) and outer barrier layer (optional).

Shield	Optional.

Covering	Inner layer (optional), expanded PTFE or polyester tape between insulated conductors and shield. Outer barrier (optional), expanded PTFE or polyester tape.

Braid	Optional.

Jacket	Extruded PUR, 15 mils minimum average thickness, 12 mils minimum thickness at any point.

Misc.	Separator, over conductor - Optional, Expanded PTFE tape.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.