UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20511
                        
                            Issued:1986-12-22
                    
                            Revised:2012-03-21
                    
                            Style
                            20511
                        
                            Extruded Flat Ribbon Cable
                    
			Rating150 deg C, 30 Vac, Horizontal flame.
		
			Conductor36 AWG - 22 AWG solid or stranded round, tinned or bare.
		
			InsulationExtruded PTFE, TFE, 3 mils minimum average thickness, 2 mils minimum thickness at any point; or flat cable complying with Manufacturer's AWM Procedure.
		
			AssemblyTwo through eighty conductors laid parallel and in one plane. Adjacent ground conductors may touch. Optional, two to six conductor groups may be laid parallel on top of each other. Insulation is built with an (optional) separator, insulation, inner and outer barrier layer (optional), and an optional shield in between the layers. Optional PVDF Jacket.
		
			ShieldOptional.
		
			CoveringOptional - Expanded PTFE tape. Inner barrier layer (optional), expanded PTFE or polyester tape between insulated conductors and shield. Outer barrier layer (optional), expanded PTFE tape.
		
			JacketOptional - Extruded PVDF, 15 mils minimum average thickness, 12 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseIn internal wiring of electronic computers and electric business machines.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20511	Issued:1986-12-22
			Revised:2012-03-21


Rating	150 deg C, 30 Vac, Horizontal flame.

Conductor	36 AWG - 22 AWG solid or stranded round, tinned or bare.

Insulation	Extruded PTFE, TFE, 3 mils minimum average thickness, 2 mils minimum thickness at any point; or flat cable complying with Manufacturer's AWM Procedure.

Assembly	Two through eighty conductors laid parallel and in one plane. Adjacent ground conductors may touch. Optional, two to six conductor groups may be laid parallel on top of each other. Insulation is built with an (optional) separator, insulation, inner and outer barrier layer (optional), and an optional shield in between the layers. Optional PVDF Jacket.

Shield	Optional.

Covering	Optional - Expanded PTFE tape. Inner barrier layer (optional), expanded PTFE or polyester tape between insulated conductors and shield. Outer barrier layer (optional), expanded PTFE tape.

Jacket	Optional - Extruded PVDF, 15 mils minimum average thickness, 12 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	In internal wiring of electronic computers and electric business machines.