UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20515
                        
                            Issued:1987-02-05
                    
                            Revised:2011-12-27
                    
                            Style
                            20515
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 90 Vac, Cable flame.
		
			Conductor40 AWG minimum. Material not specified.
		
			InsulationPVC or SRPVC or XLPVC, 7 mils min average, 5 mils minimum at any point.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. May use same or mixed AWG size.
		
			CoveringOptional - A 10 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketPVC
		
			dia of cable under jacket is 0.700 inches or less30 mils min average23 mils minimum at any point
		
			0.701-1.000 dia45 avg36 min
		
			1.001-1.500 dia60 avg48 min
		
			- Major diam if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring and external interconnection inClass 2 circuits of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20515	Issued:1987-02-05
			Revised:2011-12-27


Rating	80 deg C, 90 Vac, Cable flame.

Conductor	40 AWG minimum. Material not specified.

Insulation	PVC or SRPVC or XLPVC, 7 mils min average, 5 mils minimum at any point.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. May use same or mixed AWG size.

Covering	Optional - A 10 mil or heavier PVC covering may be extruded over the conductor assembly.

Shield	Optional.

Jacket	PVC
	dia of cable under jacket is 0.700 inches or less	30 mils min average	23 mils minimum at any point
	0.701-1.000 dia	45 avg	36 min
	1.001-1.500 dia	60 avg	48 min
	- Major diam if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring and external interconnection inClass 2 circuits of electronic equipment.