UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20518
                        
                            Issued:1987-02-19
                    
                            Revised:2012-02-29
                    
                            Style
                            20518
                        
                            Flat Ribbon Cable
                    
			Rating90 degC, 30 Vac, Horizontal flame.
		
			Conductor40 AWG - 20 AWG material not specified. Same or mixed AWG.
		
			InsulationExtruded cellular irradiated PE, 3 mils minimum thickness at any point. One or two layer spiral tape wrap using 50 percent overlap.
		
			AssemblyTwo to 300 conductors; Singles laid parallel to form ribbon cable. (Optional) Singles may be separated at web portions intermittently along the lengthwise direction of the cable.
		
			CoveringOptional - Extruded PTFE, PFA, FEP, ETFE or PE. 1 mil minimum at any point.
		
			ShieldOptional - Drain wires may be embedded in web of covering in physical contact with shields.
		
			CoveringExtruded PTFE, PFA, FEP, ETFE or PVC. 2 mil minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits in electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20518	Issued:1987-02-19
			Revised:2012-02-29


Rating	90 degC, 30 Vac, Horizontal flame.

Conductor	40 AWG - 20 AWG material not specified. Same or mixed AWG.

Insulation	Extruded cellular irradiated PE, 3 mils minimum thickness at any point. One or two layer spiral tape wrap using 50 percent overlap.

Assembly	Two to 300 conductors; Singles laid parallel to form ribbon cable. (Optional) Singles may be separated at web portions intermittently along the lengthwise direction of the cable.

Covering	Optional - Extruded PTFE, PFA, FEP, ETFE or PE. 1 mil minimum at any point.

Shield	Optional - Drain wires may be embedded in web of covering in physical contact with shields.

Covering	Extruded PTFE, PFA, FEP, ETFE or PVC. 2 mil minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits in electronic equipment.