UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20524
                        
                            Issued:1986-03-05
                    
                            Revised:2011-11-07
                    
                            Style
                            20524
                        
                            Multi conductors with extruded insulation.
                    
			Rating105 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG minimum. Material not specified.
		
			InsulationExtruded ETFE or extruded FEP, 5 mils minimum average thickness, 4 mils minimum thickness at any point.
		
			AssemblyTwo to 100 insulated singles or twisted pairs or triads laid parallel in one plane, retained by polyester elastomer, PVC, PE (film) or PET/PVC bands, min 0.040 in. wide on one or both sides of cable at max 40 in. intervals to form a flat cable.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits in electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20524	Issued:1986-03-05
			Revised:2011-11-07


Rating	105 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG minimum. Material not specified.

Insulation	Extruded ETFE or extruded FEP, 5 mils minimum average thickness, 4 mils minimum thickness at any point.

Assembly	Two to 100 insulated singles or twisted pairs or triads laid parallel in one plane, retained by polyester elastomer, PVC, PE (film) or PET/PVC bands, min 0.040 in. wide on one or both sides of cable at max 40 in. intervals to form a flat cable.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits in electronic equipment.