UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20525
                        
                            Issued:1986-03-09
                    
                            Revised:2012-07-28
                    
                            Style
                            20525
                        
                            Flat Ribbon Cable
                    
			Rating60, 80 deg C, 30 Vac, Horizontal flame.
		
			InsulationLabeled style 1354.
		
			AssemblyTwo to 20 insulated singles. May be heat or solvent bonded. Insulation is built with inner covering (optional), inner shield (optional), middle covering (optional), outer shield (optional), outer covering (optional).
		
			ShieldInner/Outer shield - Optional.
		
			CoveringInner covering optional - Extruded PVC, 2 mils minimum or 0.5 mils or heavier polyester film. Middle covering optional-Extruded PVC or heat sealed PVC tape, Polyamide Polyester, PVDF, FEP or PTFE, ETFE, or lacquered braids, 2 mils minimum at any point or 0.5 mils or heavier Polyester film or Polyester-Polyethylene laminated film. Outer covering optional - Extruded PVC or heat sealed PVC tape, Polyamide, Polyester, PVDF, FEP, PTFE, ETFE, irradiated PE, irradiated PVC or lacquered braid, 2 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20525	Issued:1986-03-09
			Revised:2012-07-28


Rating	60, 80 deg C, 30 Vac, Horizontal flame.

Insulation	Labeled style 1354.

Assembly	Two to 20 insulated singles. May be heat or solvent bonded. Insulation is built with inner covering (optional), inner shield (optional), middle covering (optional), outer shield (optional), outer covering (optional).

Shield	Inner/Outer shield - Optional.

Covering	Inner covering optional - Extruded PVC, 2 mils minimum or 0.5 mils or heavier polyester film. Middle covering optional-Extruded PVC or heat sealed PVC tape, Polyamide Polyester, PVDF, FEP or PTFE, ETFE, or lacquered braids, 2 mils minimum at any point or 0.5 mils or heavier Polyester film or Polyester-Polyethylene laminated film. Outer covering optional - Extruded PVC or heat sealed PVC tape, Polyamide, Polyester, PVDF, FEP, PTFE, ETFE, irradiated PE, irradiated PVC or lacquered braid, 2 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits of electronic equipment.