UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20531
                        
                            Issued:1987-04-23
                    
                            Revised:2012-03-27
                    
                            Style
                            20531
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating60 deg C, 150 Vac, Horizontal flame.
		
			Conductor30 AWG - 16 AWG, solid or stranded.
		
			InsulationExtruded PE or extruded FRPE, 12 mils minimum average thickness, 11 mils minimum thickness at any point.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional - A 6 mils or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded PVC.
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.395 inch or less30 mils24 mils
		
			0.396-0.500 inch35 mils28 mils
		
			0.501-0.700 inch50 mils40 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2026

Subj.758	Section 2	Page 20531	Issued:1987-04-23
			Revised:2012-03-27


Rating	60 deg C, 150 Vac, Horizontal flame.

Conductor	30 AWG - 16 AWG, solid or stranded.

Insulation	Extruded PE or extruded FRPE, 12 mils minimum average thickness, 11 mils minimum thickness at any point.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional - A 6 mils or heavier PVC covering may be extruded over the conductor assembly.

Jacket	Extruded PVC.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.395 inch or less	30 mils	24 mils
	0.396-0.500 inch	35 mils	28 mils
	0.501-0.700 inch	50 mils	40 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.