UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20539
                        
                            Issued:1987-05-18
                    
                            Revised:2012-04-26
                    
                            Style
                            20539
                        
                            Extruded Flat Ribbon Cable with Extruded Non-Integral Jacket
                    
			Rating80 deg C, 30 Vac, VW-1 flame.
		
			Conductor40 AWG minimum. Material not specified.
		
			InsulationExtruded FRPE or estruded PE or estruded PP, Solid or cellular, 3 mils minimum average thickness, 2 mils minimum thickness at any point, 125 mils max. May be irradiated.
		
			AssemblyTwo to 100 singles laid parallel. If laminated construction, insulated singles may be bonded to one or between two sheets of inner covering.
		
			ShieldInner shield - Metal faced polyester tape. Outer shield, two sheets of aluminum faced polyester tape laminated over the conductor assembly.
		
			CoveringCovering - Extruded PVC or laminated polyester film minimum 0.5 mils minimum between shields
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseAs internal wiring in Class 2 circuits of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20539	Issued:1987-05-18
			Revised:2012-04-26


Rating	80 deg C, 30 Vac, VW-1 flame.

Conductor	40 AWG minimum. Material not specified.

Insulation	Extruded FRPE or estruded PE or estruded PP, Solid or cellular, 3 mils minimum average thickness, 2 mils minimum thickness at any point, 125 mils max. May be irradiated.

Assembly	Two to 100 singles laid parallel. If laminated construction, insulated singles may be bonded to one or between two sheets of inner covering.

Shield	Inner shield - Metal faced polyester tape. Outer shield, two sheets of aluminum faced polyester tape laminated over the conductor assembly.

Covering	Covering - Extruded PVC or laminated polyester film minimum 0.5 mils minimum between shields

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	As internal wiring in Class 2 circuits of electronic equipment.