UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20540
                        
                            Issued:1987-05-18
                    
                            Revised:2012-03-21
                    
                            Style
                            20540
                        
                            Extruded Flat Ribbon Cable with Extruded Non-Integral Jacket
                    
			Rating80 deg C, 30 Vac, VW-1 flame.
		
			Conductor40 AWG minimum.
		
			InsulationExtruded FRPE or PE or PP, Solid or cellular, or XLFRPE or XLPE or XLPP.
		
			Assembly2-100 singles laid parallel. If laminated construction, insulated singles may be bonded to one or between two sheets of inner covering. Insulation is built with Inner/ Outer shield and jacket.
		
			ShieldInner Shield - Metal faced polyester tape. Outer Shield - two sheets of aluminum faced polyester tape laminated over the conductor assembly.
		
			CoveringInner Covering - Extruded PVC or laminated polyester film with 0.5 mils minimum thickness.
		
			JacketExtruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseAs internal wiring or external interconnection in Class 2 circuits of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20540	Issued:1987-05-18
			Revised:2012-03-21


Rating	80 deg C, 30 Vac, VW-1 flame.

Conductor	40 AWG minimum.

Insulation	Extruded FRPE or PE or PP, Solid or cellular, or XLFRPE or XLPE or XLPP.

Assembly	2-100 singles laid parallel. If laminated construction, insulated singles may be bonded to one or between two sheets of inner covering. Insulation is built with Inner/ Outer shield and jacket.

Shield	Inner Shield - Metal faced polyester tape. Outer Shield - two sheets of aluminum faced polyester tape laminated over the conductor assembly.

Covering	Inner Covering - Extruded PVC or laminated polyester film with 0.5 mils minimum thickness.

Jacket	Extruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	As internal wiring or external interconnection in Class 2 circuits of electronic equipment.