UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20543
                        
                            Issued:1987-05-18
                    
                            Revised:2012-05-02
                    
                            Style
                            20543
                        
                            Flat Cable
                    
			Rating80 deg C, 30 Vac, Cable and VW-1 flame.
		
			Conductor40 AWG minimum. Material not specified.
		
			InsulationSolid or cellular FRPE or PE or PP, 3 mils min average, 2 mils minimum at any point, 120 mils maximum. May be irradiated.
		
			Inner coveringExtruded PVC, minimum 2 mils over one or more insulated singles
		
			ShieldTwo sheets of aluminum faced polyester tape laminated over the conductor assembly with or without drain wires.
		
			Assembly2-100 singles laid in parallel.
		
			Outer CoveringConductor assembly is laminated between two sheets of aluminum faced polyester tape each minimum
1.0 mil in thickness.

			Outer Shield and CoveringConductor assembly is laminated between two sheets of aluminum faced polyester tape each minimum
1.0 mil in thickness.

			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseAs internal wiring in Class 2 circuits of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20543	Issued:1987-05-18
			Revised:2012-05-02


Rating	80 deg C, 30 Vac, Cable and VW-1 flame.

Conductor	40 AWG minimum. Material not specified.

Insulation	Solid or cellular FRPE or PE or PP, 3 mils min average, 2 mils minimum at any point, 120 mils maximum. May be irradiated.

Inner covering	Extruded PVC, minimum 2 mils over one or more insulated singles

Shield	Two sheets of aluminum faced polyester tape laminated over the conductor assembly with or without drain wires.

Assembly	2-100 singles laid in parallel.

Outer Covering	Conductor assembly is laminated between two sheets of aluminum faced polyester tape each minimum 1.0 mil in thickness.

Outer Shield and Covering	Conductor assembly is laminated between two sheets of aluminum faced polyester tape each minimum 1.0 mil in thickness.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	As internal wiring in Class 2 circuits of electronic equipment.