UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20544
                        
                            Issued:1987-05-18
                    
                            Revised:2012-01-30
                    
                            Style
                            20544
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 30 Vac, Cable and VW-1 flame.
		
			ConductorNo. 40 AWG minimum. Material not specified.
		
			InsulationSolid or celllular PE, FRPE or Polypropylene, 2 mils minimum at any point, 120 mils maximum. May be irradiated.
		
			AssemblyTwo-100 singles laid in parallel covered with extruded PVC. The conductor assembly is laminated between two sheets of aluminum faced polyester tape each minimum 1.0 mil in thickness, jacketed. Insulation is built with inner covering, shield, and outer covering.
		
			ShieldTwo sheets of aluminum faced polyester tape laminated over the conductor assembly with or without drain wires.
		
			CoveringInner Covering - Extruded PVC minimum 2 mils over one or more insulated singles. Outer Covering - Two sheets of polyester tape minimum 1.0 mil.
		
			JacketExtruded PVC, minimum average thickness 30 mils, minimum thickness at any point 24 mils.
		
			Misc.Outer Shield and Covering - Conductor assembly is laminated between two sheets of aluminum faced polyester tape each minimum 1.0 mil in thickness.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseAs internal wiring or external interconnection in Class 2 circuits of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20544	Issued:1987-05-18
			Revised:2012-01-30


Rating	80 deg C, 30 Vac, Cable and VW-1 flame.

Conductor	No. 40 AWG minimum. Material not specified.

Insulation	Solid or celllular PE, FRPE or Polypropylene, 2 mils minimum at any point, 120 mils maximum. May be irradiated.

Assembly	Two-100 singles laid in parallel covered with extruded PVC. The conductor assembly is laminated between two sheets of aluminum faced polyester tape each minimum 1.0 mil in thickness, jacketed. Insulation is built with inner covering, shield, and outer covering.

Shield	Two sheets of aluminum faced polyester tape laminated over the conductor assembly with or without drain wires.

Covering	Inner Covering - Extruded PVC minimum 2 mils over one or more insulated singles. Outer Covering - Two sheets of polyester tape minimum 1.0 mil.

Jacket	Extruded PVC, minimum average thickness 30 mils, minimum thickness at any point 24 mils.

Misc.	Outer Shield and Covering - Conductor assembly is laminated between two sheets of aluminum faced polyester tape each minimum 1.0 mil in thickness.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	As internal wiring or external interconnection in Class 2 circuits of electronic equipment.