UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20548
                        
                            Issued:1987-06-05
                    
                            Revised:2012-05-02
                    
                            Style
                            20548
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 30 Vac, VW-1 flame.
		
			Conductor40 AWG minimum, solid or stranded.
		
			InsulationExtruded FRPE, extruded foamed FRPE, extruded XLFEPE, extruded PE, extruded foamed PE, extruded XLPE, 4 mils minimum thickness at any point, 100 mils maximum.
		
			Assembly2 - 100 Insulated singles or groups of insulated singles laid parallel or twisted together length of lay not specified. Barrier layer or fillers optional.
		
			ShieldInner shield - Over any and/or all singles. Outer shield - Optional
		
			CoveringInner Covering - Optional - over any or all singles - 2 mils minimum thickness at any point extruded PVC, Nylon, Polyester, PVDF, ETFE or Lacquered Braid. Outer Covering - Optional, extruded PVC, 5 mils minimum thickness at any point, 40 mils maximum.
		
			JacketExtruded PVC, 30 mils min average, 24 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal or external wiring of low energy non-hazardous circuits in audio and video equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20548	Issued:1987-06-05
			Revised:2012-05-02


Rating	80 deg C, 30 Vac, VW-1 flame.

Conductor	40 AWG minimum, solid or stranded.

Insulation	Extruded FRPE, extruded foamed FRPE, extruded XLFEPE, extruded PE, extruded foamed PE, extruded XLPE, 4 mils minimum thickness at any point, 100 mils maximum.

Assembly	2 - 100 Insulated singles or groups of insulated singles laid parallel or twisted together length of lay not specified. Barrier layer or fillers optional.

Shield	Inner shield - Over any and/or all singles. Outer shield - Optional

Covering	Inner Covering - Optional - over any or all singles - 2 mils minimum thickness at any point extruded PVC, Nylon, Polyester, PVDF, ETFE or Lacquered Braid. Outer Covering - Optional, extruded PVC, 5 mils minimum thickness at any point, 40 mils maximum.

Jacket	Extruded PVC, 30 mils min average, 24 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal or external wiring of low energy non-hazardous circuits in audio and video equipment.