UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20552
                        
                            Issued:1987-08-13
                    
                            Revised:2013-01-28
                    
                            Style
                            20552
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, voltage not specified, Cable flame.
		
			Insulated Conductor40 AWG minimum. Labeled or complying with manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional.
		
			CoveringOptional, Extruded PVC, 6 mils minimum thickness at any point, over the individual single, groups or complete conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC.
		
			Diameter of cable under jacket*Minimum average thicknessMinimum thickness at any point
		
			0.700 inch or less60 mils48 mils
		
			0.701-1.500 inch80 mils64 mils
		
			1.501-2.500 inch110 mils88 mils
		
			2.501 inch and larger140 mils112 mils
		
			; * - Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20552	Issued:1987-08-13
			Revised:2013-01-28


Rating	80 deg C, voltage not specified, Cable flame.

Insulated Conductor	40 AWG minimum. Labeled or complying with manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional.

Covering	Optional, Extruded PVC, 6 mils minimum thickness at any point, over the individual single, groups or complete conductor assembly.

Shield	Optional.

Jacket	Extruded PVC.
	Diameter of cable under jacket*	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	60 mils	48 mils
	0.701-1.500 inch	80 mils	64 mils
	1.501-2.500 inch	110 mils	88 mils
	2.501 inch and larger	140 mils	112 mils
	; * - Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external wiring.