UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20553
                        
                            Issued:1987-08-13
                    
                            Revised:2012-03-19
                    
                            Style
                            20553
                        
                            Multipleonductor Cable with Extruded Non-Integral Jacket.
                    
			Rating105 deg C, voltage not specified, Cable flame.
		
			Conductor40 AWG minimum. solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM Procedures.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. May use same or mixed AWG size.
		
			CoveringOptional. Extruded PVC, 6 mils or heavier, may be extruded over the individual single, groups or complete conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC
		
			Dia of cable under jacket in inches*Minimum average thickness in milsMinimum thickness at any point in mils
		
			0.700 or less6048
		
			0.701-1.5008064
		
			1.501-2.50011088
		
			2.501 and larger140112
		
			*Major dia if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20553	Issued:1987-08-13
			Revised:2012-03-19


Rating	105 deg C, voltage not specified, Cable flame.

Conductor	40 AWG minimum. solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM Procedures.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. May use same or mixed AWG size.

Covering	Optional. Extruded PVC, 6 mils or heavier, may be extruded over the individual single, groups or complete conductor assembly.

Shield	Optional.

Jacket	Extruded PVC
	Dia of cable under jacket in inches*	Minimum average thickness in mils	Minimum thickness at any point in mils
	0.700 or less	60	48
	0.701-1.500	80	64
	1.501-2.500	110	88
	2.501 and larger	140	112
	*Major dia if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external wiring.