UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20554
                        
                            Issued:1987-08-21
                    
                            Revised:2019-11-07
                    
                            Style
                            20554
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG minimum solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional - A 6 mil or heavier covering may be extruded over the conductor assembly.
		
			JacketExtruded TPU
		
			dia of cable under jacket
		
			0.350 inches or less*15 mils min average12 mils minimum at any point
		
			0.351-0.700 dia30 avg24 min
		
			0.701-1.000 dia45 avg36 min
		
			1.001-1.500 dia60 avg48 min
		
			*Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment and appliances
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20554	Issued:1987-08-21
			Revised:2019-11-07


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG minimum solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional - A 6 mil or heavier covering may be extruded over the conductor assembly.

Jacket	Extruded TPU
	dia of cable under jacket
	0.350 inches or less*	15 mils min average	12 mils minimum at any point
	0.351-0.700 dia	30 avg	24 min
	0.701-1.000 dia	45 avg	36 min
	1.001-1.500 dia	60 avg	48 min
	*Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment and appliances