UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20556
                        
                            Issued:1987-08-21
                    
                            Revised:2012-05-24
                    
                            Style
                            20556
                        
                            Multiple-Conductor Cable using Non-Integral Extruded Jacket
                    
			Rating80 deg C, 30 Vac, Horizontal Flame.
		
			Conductor30 AWG - 16 AWG, Solid or Stranded Round.
		
			InsulationExtruded PE - 5 mils minimum average, 4 mils minimum at any point.
		
			AssemblyTwo to four conductors which may be twisted or parallel.
		
			ShieldOptional - One or two may be shielded. This may be applied as a single or a double shield over the PE Covering.
		
			CoveringExtruded PE - 4 mil min at any point extruded over the conductor assembly.
		
			JacketExtruded PVC, 12 mils minimum average, 10 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20556	Issued:1987-08-21
			Revised:2012-05-24


Rating	80 deg C, 30 Vac, Horizontal Flame.

Conductor	30 AWG - 16 AWG, Solid or Stranded Round.

Insulation	Extruded PE - 5 mils minimum average, 4 mils minimum at any point.

Assembly	Two to four conductors which may be twisted or parallel.

Shield	Optional - One or two may be shielded. This may be applied as a single or a double shield over the PE Covering.

Covering	Extruded PE - 4 mil min at any point extruded over the conductor assembly.

Jacket	Extruded PVC, 12 mils minimum average, 10 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.