UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20570
                        
                            Issued:1988-01-28
                    
                            Revised:2019-11-07
                    
                            Style
                            20570
                        
                            Multiple conductor cable using non-integral jacket.
                    
			Rating60 deg C, 30 Vac, Horizontal flame.
		
			InsulationLabeled or complies with this manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional - Extruded PVC covering, 3 mils minimum average thickness at any point may be extruded over shielded or unshielded twisted singles, individual groups of twisted singles, or the complete insulated conductor assembly.
		
			JacketExtruded PVC
		
			dia of cable under jacket
		
			0.500 or less12 mils minimum average yhickness10 mils minimum thickness at any point
		
			0.501-1.000 dia22 avg18 min
		
			1.001-1.500 dia30 avg24 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Electronic Equipment in Class 2 or Class 3 circuits.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20570	Issued:1988-01-28
			Revised:2019-11-07


Rating	60 deg C, 30 Vac, Horizontal flame.

Insulation	Labeled or complies with this manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional - Extruded PVC covering, 3 mils minimum average thickness at any point may be extruded over shielded or unshielded twisted singles, individual groups of twisted singles, or the complete insulated conductor assembly.

Jacket	Extruded PVC
	dia of cable under jacket
	0.500 or less	12 mils minimum average yhickness	10 mils minimum thickness at any point
	0.501-1.000 dia	22 avg	18 min
	1.001-1.500 dia	30 avg	24 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Electronic Equipment in Class 2 or Class 3 circuits.