UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20575
                        
                            Issued:1988-03-28
                    
                            Revised:2012-04-26
                    
                            Style
                            20575
                        
                            Boned or laminated flate ribbon cable
                    
			Rating105 deg C, 150 Vac, Horizontal flame.
		
			ConductorTwo through 150 conductors. Equivalent to Nos. 32 to 12 AWG, round or flat, nickel, silver, gold, or tin plated copper, or polyurethane coated copper. Minimum thickness of 1.2 mils; maximum thickness of 6.0 mils. Conductors may be straight or irregular shaped and laid parallel and in one plane. Minimum width of 10 mils and maximum width of 100 mils.
		
			InsulationPET film, 1.5 mil minimum thickness, bonded on each side of conductors, with 3.5 mils minimum of PVC adhesive or 1.5 mils minimum of polyester adhesive. Minimum 15 mils insulation width on outside edges of conductors and 15 mils minimum insulation width between adjacent conductors. Length of insulated conductors not specified.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20575	Issued:1988-03-28
			Revised:2012-04-26


Rating	105 deg C, 150 Vac, Horizontal flame.

Conductor	Two through 150 conductors. Equivalent to Nos. 32 to 12 AWG, round or flat, nickel, silver, gold, or tin plated copper, or polyurethane coated copper. Minimum thickness of 1.2 mils; maximum thickness of 6.0 mils. Conductors may be straight or irregular shaped and laid parallel and in one plane. Minimum width of 10 mils and maximum width of 100 mils.

Insulation	PET film, 1.5 mil minimum thickness, bonded on each side of conductors, with 3.5 mils minimum of PVC adhesive or 1.5 mils minimum of polyester adhesive. Minimum 15 mils insulation width on outside edges of conductors and 15 mils minimum insulation width between adjacent conductors. Length of insulated conductors not specified.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.