UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20579
                        
                            Issued:1988-05-05
                    
                            Revised:2012-06-25
                    
                            Style
                            20579
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, 30 Vac, Horizontal Flame (construction A), Cable flame (construction B).
		
			Insulated ConductorNo. 40 AWG minimum.  Labeled or complying with manufacturer's AWM proceure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional - Extruded PVC, 3 mils minimum thickness at any point, may be extruded over shielded or unshielded twisted singles, individual groups of twisted singles, or the complete insulated conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC
		
			dia of cable under jacket*contructionmin. avgmin. at any point
		
			0.350 inch or less(const A)15 mils12 mils
		
			0.350 inch or less(const B)30 mils24 mils
		
			0.351-0.700 inch(const A) and (const B)30 mils24 mils
		
			0.701-1.000 inch(const A) and (const B)40 mils36 mils
		
			1.001-1.500 inch(const A) and (const B)54 mils48 mils
		
			*Major dia if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseConstruction A: Internal Wiring of Class 2 Circuits in Electronic Equipment. Construction B: External Wiring of Class 2 Circuits in Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20579	Issued:1988-05-05
			Revised:2012-06-25


Rating	60 deg C, 30 Vac, Horizontal Flame (construction A), Cable flame (construction B).

Insulated Conductor	No. 40 AWG minimum. Labeled or complying with manufacturer's AWM proceure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional - Extruded PVC, 3 mils minimum thickness at any point, may be extruded over shielded or unshielded twisted singles, individual groups of twisted singles, or the complete insulated conductor assembly.

Shield	Optional.

Jacket	Extruded PVC
	dia of cable under jacket*	contruction	min. avg	min. at any point
	0.350 inch or less	(const A)	15 mils	12 mils
	0.350 inch or less	(const B)	30 mils	24 mils
	0.351-0.700 inch	(const A) and (const B)	30 mils	24 mils
	0.701-1.000 inch	(const A) and (const B)	40 mils	36 mils
	1.001-1.500 inch	(const A) and (const B)	54 mils	48 mils
	*Major dia if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Construction A: Internal Wiring of Class 2 Circuits in Electronic Equipment. Construction B: External Wiring of Class 2 Circuits in Electronic Equipment.