UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20581
                        
                            Issued:1988-06-07
                    
                            Revised:2012-04-17
                    
                            Style
                            20581
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, 30 Vac, Cable flame (construction B), Horizontal Flame (construction A).
		
			Conductor40 AWG min, solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional - Extruded PVC covering, 3 mils minimum at any point may be extruded over shielded or unshielded twisted singles, individual groups of twisted singles, or the complete insulated conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC
		
			dia of cable under jacket is 0.350 inches or less*(const A)15 mils min avg12 mils min at any point
		
			dia of cable under jacket is 0.350 inches or less(const B)30 avg24 min
		
			0.351-0.700 dia(const A) and (const B)30 mils avg24 mils min
		
			0.701-1.000 dia(const A) and (const B)40 avg36 min
		
			1.001-1.500 dia(const A) and (const B)54 avg48 min
		
			*Major dia if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseConstruction A: Internal Wiring of Class 2 Circuits in Electronic Equipment. Construction B: External Wiring of Class 2 Circuits in Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20581	Issued:1988-06-07
			Revised:2012-04-17


Rating	60 deg C, 30 Vac, Cable flame (construction B), Horizontal Flame (construction A).

Conductor	40 AWG min, solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional - Extruded PVC covering, 3 mils minimum at any point may be extruded over shielded or unshielded twisted singles, individual groups of twisted singles, or the complete insulated conductor assembly.

Shield	Optional.

Jacket	Extruded PVC
	dia of cable under jacket is 0.350 inches or less*	(const A)	15 mils min avg	12 mils min at any point
	dia of cable under jacket is 0.350 inches or less	(const B)	30 avg	24 min
	0.351-0.700 dia	(const A) and (const B)	30 mils avg	24 mils min
	0.701-1.000 dia	(const A) and (const B)	40 avg	36 min
	1.001-1.500 dia	(const A) and (const B)	54 avg	48 min
	*Major dia if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Construction A: Internal Wiring of Class 2 Circuits in Electronic Equipment. Construction B: External Wiring of Class 2 Circuits in Electronic Equipment.