UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20582
                        
                            Issued:1988-06-23
                    
                            Revised:2012-04-20
                    
                            Style
                            20582
                        
                            Parallel cable with extruded integral insulation and jacket.
                    
			Rating75, 90, 105 deg C, 300 Vac.
		
			ConductorTwo 24 AWG - 16 AWG consisting of 36 AWG - 34 AWG bare copper stranding and one 24 AWG - 20 AWG consisting of 36 AWG bare copper stranding.  One 24 AWG - 20 AWG conductor shall be centrally located between two 24 AWG - 16 AWG conductors.

			SeparatorOptional - Nylon (polyamide) or polyester, 3 mils minimum thickness at any point, shall be applied directly over the 24 AWG or 22 AWG copper conductor.
		
			Intergral insulation and jacketExtruded PVC, 45 mils minimum average thickness, 40 mils minimum thickness at any point.
		
			AssemblyThree conductors, same as for Type SPT-2.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseSpecial purpose cord to be used only as a power-supply cord for appliances employing an attachment plug with a water detection circuit.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20582	Issued:1988-06-23
			Revised:2012-04-20


Rating	75, 90, 105 deg C, 300 Vac.

Conductor	Two 24 AWG - 16 AWG consisting of 36 AWG - 34 AWG bare copper stranding and one 24 AWG - 20 AWG consisting of 36 AWG bare copper stranding. One 24 AWG - 20 AWG conductor shall be centrally located between two 24 AWG - 16 AWG conductors.

Separator	Optional - Nylon (polyamide) or polyester, 3 mils minimum thickness at any point, shall be applied directly over the 24 AWG or 22 AWG copper conductor.

Intergral insulation and jacket	Extruded PVC, 45 mils minimum average thickness, 40 mils minimum thickness at any point.

Assembly	Three conductors, same as for Type SPT-2.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Special purpose cord to be used only as a power-supply cord for appliances employing an attachment plug with a water detection circuit.