UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20586
                        
                            Issued:1988-06-07
                    
                            Revised:2012-07-20
                    
                            Style
                            20586
                        
                            Parallel Cable with extruded integral insulation and jacket
                    
			Rating105 deg C, 300 Vac, FT2 flame.
		
			ConductorTwo 16-18 AWG, bare stranded (36-34 AWG strands) copper and one 22-26 AWG bare, stranded (36 AWG strands) copper. A 3 mil minimum at any point covering of nylon, polyester or propylene shall be applied directly over the 22-26 AWG copper conductor.
		
			InsulationExtruded integral PVC insulation and jacket, 45 mils min average, 40 mils minimum at any point.
		
			AssemblyThree conductors, same as for Type SPT-2. The two 16-18 AWG conductors shall be parallel and the 22-26 AWG conductor shall be located between the 16-18 AWG conductors.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseSpecial purpose cord to be used only as a power-supply cord for appliances employing an attachment plug with a water detection circuit.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20586	Issued:1988-06-07
			Revised:2012-07-20


Rating	105 deg C, 300 Vac, FT2 flame.

Conductor	Two 16-18 AWG, bare stranded (36-34 AWG strands) copper and one 22-26 AWG bare, stranded (36 AWG strands) copper. A 3 mil minimum at any point covering of nylon, polyester or propylene shall be applied directly over the 22-26 AWG copper conductor.

Insulation	Extruded integral PVC insulation and jacket, 45 mils min average, 40 mils minimum at any point.

Assembly	Three conductors, same as for Type SPT-2. The two 16-18 AWG conductors shall be parallel and the 22-26 AWG conductor shall be located between the 16-18 AWG conductors.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Special purpose cord to be used only as a power-supply cord for appliances employing an attachment plug with a water detection circuit.