UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20593
                        
                            Issued:1988-08-26
                    
                            Revised:2012-03-29
                    
                            Style
                            20593
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating90 deg C, 600 Vac, Horizontal Flame Test.
		
			Conductor30 AWG - 10 AWG, solid or stranded.
		
			InsulationTPE, 15 mils minimum average thickness, 13 mils minimum thickness at any point.
		
			CoveringExtruded nylon, 4 mils minimum thickness at any point.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketTPE
		
			dia of cable under jacket(inches)Minimum average thickness(mils)Minimum thickness at any point(mils)
		
			0.700 or less3024
		
			0.701-1.0004536
		
			1.001-1.5006048
		
			1.501-2.5008064
		
			2.501-4.00011088
		
			4.001 and larger140112
		
			* Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20593	Issued:1988-08-26
			Revised:2012-03-29


Rating	90 deg C, 600 Vac, Horizontal Flame Test.

Conductor	30 AWG - 10 AWG, solid or stranded.

Insulation	TPE, 15 mils minimum average thickness, 13 mils minimum thickness at any point.

Covering	Extruded nylon, 4 mils minimum thickness at any point.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Jacket	TPE
	dia of cable under jacket(inches)	Minimum average thickness(mils)	Minimum thickness at any point(mils)
	0.700 or less	30	24
	0.701-1.000	45	36
	1.001-1.500	60	48
	1.501-2.500	80	64
	2.501-4.000	110	88
	4.001 and larger	140	112
	* Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of electronic equipment.