UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20601
                        
                            Issued:1988-12-08
                    
                            Revised:2012-03-21
                    
                            Style
                            20601
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating80 deg C, 300 Vac, horizontal flame.
		
			InsulationLabeled or complying with Manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional - A 6 mil thick or thicker PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded PVC
		
			Diameter of core assembly under jacket (inches) ¿Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.700 or less3024
		
			0.701-1.0006048
		
			1.001-1.5008064
		
			Major diameter if cable is flat or oval
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring and external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20601	Issued:1988-12-08
			Revised:2012-03-21


Rating	80 deg C, 300 Vac, horizontal flame.

Insulation	Labeled or complying with Manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional - A 6 mil thick or thicker PVC covering may be extruded over the conductor assembly.

Jacket	Extruded PVC
	Diameter of core assembly under jacket (inches) ¿	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.700 or less	30	24
	0.701-1.000	60	48
	1.001-1.500	80	64
	Major diameter if cable is flat or oval

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring and external interconnection of electronic equipment.