UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20603
                        
                            Issued:1988-12-29
                    
                            Revised:2012-03-21
                    
                            Style
                            20603
                        
                            Multiple-Conductor Cable Using Non-Integral Jacket
                    
			Rating80 deg C, 300 Vac, Cable flame.
		
			Conductor36 AWG - 4/0 AWG solid or stranded.
		
			InsulationExtruded PVC
		
			AWG conductor sizeminimum average thickness in milsminimum thickness at any point in mils
		
			36-102220
		
			9-73037
		
			6-24540
		
			1-4/06054
		
			AssemblyTwo or more twisted singles or groups of twisted singles twisted together or groups may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional - A 10 mil thick or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded PVC
		
			*Diameter of cable under jacketminimum average thickness in milsminimum thickness at any point in mils
		
			0.700 inches or less3024
		
			0.701-1.0004536
		
			1.001-1.5006048
		
			1.501-2.5008064
		
			2.501-4.00011088
		
			4.001 inches and larger140112
		
			* Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal or external interconnections of electronic equipment and appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20603	Issued:1988-12-29
			Revised:2012-03-21


Rating	80 deg C, 300 Vac, Cable flame.

Conductor	36 AWG - 4/0 AWG solid or stranded.

Insulation	Extruded PVC
	AWG conductor size	minimum average thickness in mils	minimum thickness at any point in mils
	36-10	22	20
	9-7	30	37
	6-2	45	40
	1-4/0	60	54

Assembly	Two or more twisted singles or groups of twisted singles twisted together or groups may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional - A 10 mil thick or heavier PVC covering may be extruded over the conductor assembly.

Jacket	Extruded PVC
	*Diameter of cable under jacket	minimum average thickness in mils	minimum thickness at any point in mils
	0.700 inches or less	30	24
	0.701-1.000	45	36
	1.001-1.500	60	48
	1.501-2.500	80	64
	2.501-4.000	110	88
	4.001 inches and larger	140	112
	* Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal or external interconnections of electronic equipment and appliances.