UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20617
                        
                            Issued:1989-06-05
                    
                            Revised:2012-07-25
                    
                            Style
                            20617
                        
                            Heating Cable
                    
			Rating105 deg C, 300 Vac.
		
			Conductor14 AWG consisting of 26 AWG or smaller stranded, tinned or bare copper.
		
			InsulationInner Insulation TPE. Min wall thickness: 16 mils, Web thickness: min 60 mils, Wall after rip: min 13 mils. Outer insulation over resistance wire TPE , 16 mils min average, 14 mils minimum at any point
		
			AssemblyTwo conductors; The resistance wire is spirally wound around the insulated conductor, having the insulation alternately removed from 0.125 in to 0.75 in. The AWG size and number of turns per inch will determine the watts per ft of the completed heating cable. The resistance wire may be soldered to the exposed conductor.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UsePipe Heating Cable where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20617	Issued:1989-06-05
			Revised:2012-07-25


Rating	105 deg C, 300 Vac.

Conductor	14 AWG consisting of 26 AWG or smaller stranded, tinned or bare copper.

Insulation	Inner Insulation TPE. Min wall thickness: 16 mils, Web thickness: min 60 mils, Wall after rip: min 13 mils. Outer insulation over resistance wire TPE , 16 mils min average, 14 mils minimum at any point

Assembly	Two conductors; The resistance wire is spirally wound around the insulated conductor, having the insulation alternately removed from 0.125 in to 0.75 in. The AWG size and number of turns per inch will determine the watts per ft of the completed heating cable. The resistance wire may be soldered to the exposed conductor.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Pipe Heating Cable where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.