UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20620
                        
                            Issued:1989-07-24
                    
                            Revised:2011-09-26
                    
                            Style
                            20620
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 90 Vac, Horizontal Flame, Cable Flame (External).
		
			Insulated ConductorLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more insulated singles or groups of insulated singles cabled together to form a flat, oval or round assembly. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.
		
			CoveringOptional. Extruded PVC, PTFE, PFA, FEP or ETFE, 5 mils minimum thickness at any point
		
			ShieldOptional.
		
			CoveringOptional. Extruded PVC, PTFE, PFA, FEP or ETFE, 5 mils minimum thickness at any point
		
			ShieldOptional.
		
			JacketExtruded PVC.
		
			Diameter of core assembly under jacket*Minimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.00045 mils36 mils
		
			1.001-1.50060 mils48 mils
		
			1.501-2.50080 mils64 mils
		
			2.501-4.000110 mils88 mils
		
			4.001 inch or greater140 mils112 mils
		
			*Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring and external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20620	Issued:1989-07-24
			Revised:2011-09-26


Rating	80 deg C, 90 Vac, Horizontal Flame, Cable Flame (External).

Insulated Conductor	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more insulated singles or groups of insulated singles cabled together to form a flat, oval or round assembly. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Covering	Optional. Extruded PVC, PTFE, PFA, FEP or ETFE, 5 mils minimum thickness at any point

Shield	Optional.

Covering	Optional. Extruded PVC, PTFE, PFA, FEP or ETFE, 5 mils minimum thickness at any point

Shield	Optional.

Jacket	Extruded PVC.
	Diameter of core assembly under jacket*	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000	45 mils	36 mils
	1.001-1.500	60 mils	48 mils
	1.501-2.500	80 mils	64 mils
	2.501-4.000	110 mils	88 mils
	4.001 inch or greater	140 mils	112 mils
	*Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring and external interconnection of electronic equipment.