UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20624
                        
                            Issued:1989-09-20
                    
                            Revised:2012-04-25
                    
                            Style
                            20624
                        
                            Bonded or laminated Flat Ribbon Cable
                    
			Rating80 deg C, 60 Vac, Horizontal flame.
		
			Conductor42 AWG - 12 AWG material not specified. Flat or round conductors. Straight or irregular parallel in one plane. Flat conductors 1.0 - 10.0 mils thick, 3-100 mils wide.
		
			Insulation(1) PVC, 3.5 mils minimum bonded each side, or (2) 0.8 mil minimum biaxially oriented PETP film bonded each side with 0.5 mil polyester adhesive or (3) 0.8 mils minimum PETP film or flame retardant polyester film and 0.5 mil minimum PVC on each side of conductors laminated together. 10 mils minimum edge width and 3 mils minimum between conductors. (4) 0.8 mils minimum polyimide film bonded on each side of conductors with 0.4 mil minimum polyester adhesive. Total combined thickness shall be 1.2 mils minimum.
		
			AssemblyTwo to 150 conductors
		
			ShieldOptional - Metal faced polyester tape. Drain wire optional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits in electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20624	Issued:1989-09-20
			Revised:2012-04-25


Rating	80 deg C, 60 Vac, Horizontal flame.

Conductor	42 AWG - 12 AWG material not specified. Flat or round conductors. Straight or irregular parallel in one plane. Flat conductors 1.0 - 10.0 mils thick, 3-100 mils wide.

Insulation	(1) PVC, 3.5 mils minimum bonded each side, or (2) 0.8 mil minimum biaxially oriented PETP film bonded each side with 0.5 mil polyester adhesive or (3) 0.8 mils minimum PETP film or flame retardant polyester film and 0.5 mil minimum PVC on each side of conductors laminated together. 10 mils minimum edge width and 3 mils minimum between conductors. (4) 0.8 mils minimum polyimide film bonded on each side of conductors with 0.4 mil minimum polyester adhesive. Total combined thickness shall be 1.2 mils minimum.

Assembly	Two to 150 conductors

Shield	Optional - Metal faced polyester tape. Drain wire optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits in electronic equipment.