UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20626
                        
                            Issued:1989-10-13
                    
                            Revised:2012-07-07
                    
                            Style
                            20626
                        
                            Jacketed Cable
                    
			Rating80, 90 deg C, 30 Vac, 150 Vac, 300 Vac, 600 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional.
		
			JacketTPE
		
			dia of cable under jacket is 0.700 inches or less*30 mils min average24 mils minimum at any point
		
			0.701-1.000 in45 avg36 min
		
			1.001-1.500 in60 avg48 min
		
			1.501-2.500 in80 avg64 min
		
			2.501-4.000 in110 avg88 min
		
			4.001 in or larger140 avg112 min
		
			*Major dia if cable is flat or oval.
		
			Misc.Braid, optional, provided over Jacket.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external inter-connection of electronic equipment (such as desk-type calculators, dictating machines, or X-ray equipment).
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20626	Issued:1989-10-13
			Revised:2012-07-07


Rating	80, 90 deg C, 30 Vac, 150 Vac, 300 Vac, 600 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional.

Jacket	TPE
	dia of cable under jacket is 0.700 inches or less*	30 mils min average	24 mils minimum at any point
	0.701-1.000 in	45 avg	36 min
	1.001-1.500 in	60 avg	48 min
	1.501-2.500 in	80 avg	64 min
	2.501-4.000 in	110 avg	88 min
	4.001 in or larger	140 avg	112 min
	*Major dia if cable is flat or oval.

Misc.	Braid, optional, provided over Jacket.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external inter-connection of electronic equipment (such as desk-type calculators, dictating machines, or X-ray equipment).