UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20628
                        
                            Issued:1989-10-30
                    
                            Revised:2012-07-20
                    
                            Style
                            20628
                        
                            Multiple conductor cable using non-integral jacket
                    
			Rating90 deg C, 120 Vac, 240 Vac, 300 Vac, Horizontal flame, Moisture Resistant 75 deg C.
		
			Conductor20 AWG - 14 AWG solid or stranded round.
		
			InsulationExtruded TPE, 20 mils min average, 18 mils minimum at any point. See facing page for compound designation.
		
			Misc.Conductive Core -Over the conductor is an extruded carbon loaded (radiation cross-linked) polyolefin, thickness not specified.
		
			AssemblyTwo to three conductors.
		
			ShieldOptional.
		
			CoveringOptional - extruded modified polyurethane, extruded polyester or extruded thermoplastic elastomer, 6 mils min at any point.
		
			JacketExtruded TPE, 18 mils min average, 14 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UsePipe Heating and Roof and Gutter Deicing cable where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20628	Issued:1989-10-30
			Revised:2012-07-20


Rating	90 deg C, 120 Vac, 240 Vac, 300 Vac, Horizontal flame, Moisture Resistant 75 deg C.

Conductor	20 AWG - 14 AWG solid or stranded round.

Insulation	Extruded TPE, 20 mils min average, 18 mils minimum at any point. See facing page for compound designation.

Misc.	Conductive Core -Over the conductor is an extruded carbon loaded (radiation cross-linked) polyolefin, thickness not specified.

Assembly	Two to three conductors.

Shield	Optional.

Covering	Optional - extruded modified polyurethane, extruded polyester or extruded thermoplastic elastomer, 6 mils min at any point.

Jacket	Extruded TPE, 18 mils min average, 14 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Pipe Heating and Roof and Gutter Deicing cable where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.