UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20632
                        
                            Issued:1989-12-21
                    
                            Revised:2012-04-20
                    
                            Style
                            20632
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating105 deg C, Voltage not specified, Horizontal flame.
		
			Conductor38 AWG - 20 AWG, solid or stranded.
		
			Conductor CoatingOptional - Polyimide coating over the conductors.
		
			InsulationExtruded TFE, extruded FEP or extruded TFE/FEP, 7 mils minimum thickness.
		
			AssemblyTwo to 225 conductors, laid parallel and in one plane. This forms a flat cable with a single row of conductors and adjacent conductors may touch.
		
			SeparatorOptional - TFE tape and/or FEP tape, 2 mils minimum thickness, may be used between core assembly and shield.
		
			ShieldOptional - Aluminum faced polyester tape without drain wire.
		
			CoveringOptional.
		
			JacketExtruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal and external wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20632	Issued:1989-12-21
			Revised:2012-04-20


Rating	105 deg C, Voltage not specified, Horizontal flame.

Conductor	38 AWG - 20 AWG, solid or stranded.

Conductor Coating	Optional - Polyimide coating over the conductors.

Insulation	Extruded TFE, extruded FEP or extruded TFE/FEP, 7 mils minimum thickness.

Assembly	Two to 225 conductors, laid parallel and in one plane. This forms a flat cable with a single row of conductors and adjacent conductors may touch.

Separator	Optional - TFE tape and/or FEP tape, 2 mils minimum thickness, may be used between core assembly and shield.

Shield	Optional - Aluminum faced polyester tape without drain wire.

Covering	Optional.

Jacket	Extruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal and external wiring.