UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20634
                        
                            Issued:1990-01-09
                    
                            Revised:2012-03-21
                    
                            Style
                            20634
                        
                            Bonded Flat Ribbon Cable
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			Assembly2-100 insulated singles or twisted pair or triads laid parallel in one plane, retained by heat or film melt bonded sections at random intervals from 2 to 100 in a part, with or without PVC bands on one side of the cables in between the heat or film melt bonded sections. Width of heat or film melt bonded sections minimum 1 inch, width of PVC bands, approximately 3/16 inches. PVC film or polyester/PVC laminated film may be heat bonded on one side of cable.
		
			ShieldOptional.
		
			CoveringOptional - Extruded PVC, 5 mils minimum thickness at any point, 80 mils maximum thickness.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Electronic Equipment, such as computers and electric business machines.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20634	Issued:1990-01-09
			Revised:2012-03-21


Rating	80 deg C, 300 Vac, Horizontal flame.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	2-100 insulated singles or twisted pair or triads laid parallel in one plane, retained by heat or film melt bonded sections at random intervals from 2 to 100 in a part, with or without PVC bands on one side of the cables in between the heat or film melt bonded sections. Width of heat or film melt bonded sections minimum 1 inch, width of PVC bands, approximately 3/16 inches. PVC film or polyester/PVC laminated film may be heat bonded on one side of cable.

Shield	Optional.

Covering	Optional - Extruded PVC, 5 mils minimum thickness at any point, 80 mils maximum thickness.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Electronic Equipment, such as computers and electric business machines.