UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20637
                        
                            Issued:1990-02-08
                    
                            Revised:2012-05-18
                    
                            Style
                            20637
                        
                            Bonded or laminated flat ribbon cable
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo to 200 insulated singles, twisted pair triads or quads laid parallel in one plane, bonded together or to a PVC-Polyester or PVC covering in such a fashion to form a flat ribbon type cable. May include mixed AWG sizes. Manufacturer shall maintain a record of all singles used in each cable. Sections may be slit into singles or groups of conductors. Insulation is built with inner covering (optional), shield (optional), and outer covering (optional).
		
			CoveringOptional - One or two sheets of PVC or polyester/PVC laminated film, each sheet is 2 mil min at any point, laminated over the cable assembly. Film covering may be perforated. Hole dia and pattern is not specified.
		
			ShieldOptional.
		
			CoveringOptional.PVC, 5 mils min at any point, 80 mils max.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20637	Issued:1990-02-08
			Revised:2012-05-18


Rating	80 deg C, 30 Vac, Horizontal flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two to 200 insulated singles, twisted pair triads or quads laid parallel in one plane, bonded together or to a PVC-Polyester or PVC covering in such a fashion to form a flat ribbon type cable. May include mixed AWG sizes. Manufacturer shall maintain a record of all singles used in each cable. Sections may be slit into singles or groups of conductors. Insulation is built with inner covering (optional), shield (optional), and outer covering (optional).

Covering	Optional - One or two sheets of PVC or polyester/PVC laminated film, each sheet is 2 mil min at any point, laminated over the cable assembly. Film covering may be perforated. Hole dia and pattern is not specified.

Shield	Optional.

Covering	Optional.PVC, 5 mils min at any point, 80 mils max.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.