UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20639
                        
                            Issued:1990-02-08
                    
                            Revised:2012-03-27
                    
                            Style
                            20639
                        
                            Flat Ribbon Cable
                    
			Rating75 deg C, 120 Vac, Horizontal flame.
		
			ConductorInner conductor - 2 or 3 0.002 to 0.003 by 0.015 to 0.030 in, flat tin copper ribbons wound spirally, 14 to 30 turns per in, over a rayon or polyester core. Conductive Core- One conductor within the carbon loaded thermoset polyolefin, thickness not specified. Outer Conductor five to eight 34 to 38 AWG tin copper conductors wound spirally over the extruded conductive core at 4 to 28 turns per in. Conductive coating - applied over conductive core assembly, thickness not specified. Foil Overwrap - Optional - Foil applied over conductive core thickness not specified.
		
			InsulationExtruded FRPE, 13 mils min average, 11 mils minimum at any point.
		
			AssemblyInsulaton is built with inner conductor, conductive core, outer conductor, conductive coating, foil overwrap and insulate.

			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseWiring of Electric Bedding.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20639	Issued:1990-02-08
			Revised:2012-03-27


Rating	75 deg C, 120 Vac, Horizontal flame.

Conductor	Inner conductor - 2 or 3 0.002 to 0.003 by 0.015 to 0.030 in, flat tin copper ribbons wound spirally, 14 to 30 turns per in, over a rayon or polyester core. Conductive Core- One conductor within the carbon loaded thermoset polyolefin, thickness not specified. Outer Conductor five to eight 34 to 38 AWG tin copper conductors wound spirally over the extruded conductive core at 4 to 28 turns per in. Conductive coating - applied over conductive core assembly, thickness not specified. Foil Overwrap - Optional - Foil applied over conductive core thickness not specified.

Insulation	Extruded FRPE, 13 mils min average, 11 mils minimum at any point.

Assembly	Insulaton is built with inner conductor, conductive core, outer conductor, conductive coating, foil overwrap and insulate.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Wiring of Electric Bedding.