UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20643
                        
                            Issued:1990-03-01
                    
                            Revised:2011-10-14
                    
                            Style
                            20643
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating105 deg C, 300 Vac, Cable flame. Optional - Oil Resistant 60 deg C.
		
			Conductor40 AWG min, solid or stranded.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblySame as for Type SVTO. Consists of two or more singles, twisted pairs or groups of twisted singles twisted together. The singles or groups of singles may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional - A 6 mil or heavier thermoplastic covering may be extruded over the conductor assembly.
		
			JacketExtruded PVC
		
			dia of cable under jacket is 0.700 inches or less*30 mils min average24 mils minimum at any point
		
			0.701-1.000 in45 avg36 min
		
			1.001-1.500 in60 avg48 min
		
			1.501-2.500 in80 avg64 min
		
			2.501-4.000 in110 avg88 min
		
			4.001 in and larger140 avg112 min
		
			*Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment and/or appliances. Tags may also indicate the following: 600 V Peak for Electronic Use Only, or Jacket Suitable for 60 deg C Immersion in Oil.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20643	Issued:1990-03-01
			Revised:2011-10-14


Rating	105 deg C, 300 Vac, Cable flame. Optional - Oil Resistant 60 deg C.

Conductor	40 AWG min, solid or stranded.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Same as for Type SVTO. Consists of two or more singles, twisted pairs or groups of twisted singles twisted together. The singles or groups of singles may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional - A 6 mil or heavier thermoplastic covering may be extruded over the conductor assembly.

Jacket	Extruded PVC
	dia of cable under jacket is 0.700 inches or less*	30 mils min average	24 mils minimum at any point
	0.701-1.000 in	45 avg	36 min
	1.001-1.500 in	60 avg	48 min
	1.501-2.500 in	80 avg	64 min
	2.501-4.000 in	110 avg	88 min
	4.001 in and larger	140 avg	112 min
	*Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment and/or appliances. Tags may also indicate the following: 600 V Peak for Electronic Use Only, or Jacket Suitable for 60 deg C Immersion in Oil.