UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20646
                        
                            Issued:1990-03-16
                    
                            Revised:2012-07-25
                    
                            Style
                            20646
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 300 Vac, Cable flame.
		
			ConductorStranded only
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional.
		
			JacketExtruded PVC, for if the diameter of cable under jacket is 1.000 inches, or less 60 mils min average, 48 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFlexible External Interconnection on Elevators Between Wiring on the Car and Devices on the Car Door or Gates.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20646	Issued:1990-03-16
			Revised:2012-07-25


Rating	80 deg C, 300 Vac, Cable flame.

Conductor	Stranded only

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional.

Jacket	Extruded PVC, for if the diameter of cable under jacket is 1.000 inches, or less 60 mils min average, 48 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Flexible External Interconnection on Elevators Between Wiring on the Car and Devices on the Car Door or Gates.