UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20648
                        
                            Issued:1990-05-31
                    
                            Revised:2012-05-29
                    
                            Style
                            20648
                        
                            Multiple-Conductor Cable Using Non-Integral Extruded Jacket and Covering
                    
			Rating105 deg C, 300 Vac, FT2 Flame, Oil Resistant 60 deg C or 80 deg, Gasoline Resistant.
		
			Conductor26-18 AWG, Solid or Stranded Round.
		
			InsulationLabeled or complies with the manufacturers procedure
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, all groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional - Tinned soft iron shield applied as a braid with an overall polyester tape wrap.
		
			JacketExtruded PVC
		
			diameter of cable under jacket in inchesmils minimum averagemils minimum at any point
		
			0.350 or less3024
		
			0.351-0.4504032
		
			0.451-0.5505040
		
			0.551-0.7506048
		
			0.751-0.9507056
		
			0.951-1.2008064
		
			CoveringExtruded Nylon
		
			diameter of cable under jacket in inchesmils minimum thickness at any point
		
			0.350 or less4
		
			0.351 - 0.4505
		
			0.451 - 0.5506
		
			0.551 - 0.7507
		
			0.751 - 0.9508
		
			0.951 - 1.2009
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20648	Issued:1990-05-31
			Revised:2012-05-29


Rating	105 deg C, 300 Vac, FT2 Flame, Oil Resistant 60 deg C or 80 deg, Gasoline Resistant.

Conductor	26-18 AWG, Solid or Stranded Round.

Insulation	Labeled or complies with the manufacturers procedure

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, all groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional - Tinned soft iron shield applied as a braid with an overall polyester tape wrap.

Jacket	Extruded PVC
	diameter of cable under jacket in inches	mils minimum average	mils minimum at any point
	0.350 or less	30	24
	0.351-0.450	40	32
	0.451-0.550	50	40
	0.551-0.750	60	48
	0.751-0.950	70	56
	0.951-1.200	80	64

Covering	Extruded Nylon
	diameter of cable under jacket in inches	mils minimum thickness at any point
	0.350 or less	4
	0.351 - 0.450	5
	0.451 - 0.550	6
	0.551 - 0.750	7
	0.751 - 0.950	8
	0.951 - 1.200	9

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment.