UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20652
                        
                            Issued:1990-06-29
                    
                            Revised:2012-10-17
                    
                            Style
                            20652
                        
                            Multiconductor cable with extruded non-integral jacket.
                    
			Rating105 deg C, 30 Vac, Cable flame on insulated singles and complete cable.
		
			Conductor40 AWG min., material not specified.
		
			InsulationFRPE or PE or XLPE or XLFRPE, Solid or cellular , 4 mils min average, 100 mils maximum, radiation or chemically cross-linked.
		
			AssemblyInsulated singles or groups of insulated singles laid parallel or twisted together with optional inner shield, optional covering, optional inner jacket, optional outer shield and jacket. Length of lay not specified. Barrier layer or fillers optional.
		
			ShieldInner (Optional) Over any and/or all singles. Outer - (optional).
		
			CoveringOptional. Over any or all singles - 2 mils minimum at any (Optional)point extruded PVC, Polymide, Polyester, LPVDF, ETFE or lacquered braid.
		
			JacketInner jacket - (Optional)Extruded PVC, 5 mils min average, 3 mils minimum at any point. Outer jacket - Extruded PVC, 5 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseWiring of low energy non-hazardous circuits in audio and video equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20652	Issued:1990-06-29
			Revised:2012-10-17


Rating	105 deg C, 30 Vac, Cable flame on insulated singles and complete cable.

Conductor	40 AWG min., material not specified.

Insulation	FRPE or PE or XLPE or XLFRPE, Solid or cellular , 4 mils min average, 100 mils maximum, radiation or chemically cross-linked.

Assembly	Insulated singles or groups of insulated singles laid parallel or twisted together with optional inner shield, optional covering, optional inner jacket, optional outer shield and jacket. Length of lay not specified. Barrier layer or fillers optional.

Shield	Inner (Optional) Over any and/or all singles. Outer - (optional).

Covering	Optional. Over any or all singles - 2 mils minimum at any (Optional)point extruded PVC, Polymide, Polyester, LPVDF, ETFE or lacquered braid.

Jacket	Inner jacket - (Optional)Extruded PVC, 5 mils min average, 3 mils minimum at any point. Outer jacket - Extruded PVC, 5 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Wiring of low energy non-hazardous circuits in audio and video equipment.