UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20653
                        
                            Issued:1990-09-12
                    
                            Revised:2012-06-25
                    
                            Style
                            20653
                        
                            Bonded flat ribbon cable
                    
			Rating80 deg C, 90 Vac, Horizontal flame.
		
			Conductor36-20 AWG, solid or stranded round.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			Assembly2 to 150 insulated singles or twisted pairs or triads laid parallel in one plane, retained heat or film melt bonded section at random intervals from 1/8 to 100 in. apart, with or without PVC bands on one side of the cables in between the heat or film melt bonded sections. Width of heat or film melt bonded sections min. 1/8 inch Manufacturer shall maintain a record of all singles used in each cable. PVC film or polyester/PVC laminated film may be heat bonded on one side of cable.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits in electronic equipment (such as computers and business machines).
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20653	Issued:1990-09-12
			Revised:2012-06-25


Rating	80 deg C, 90 Vac, Horizontal flame.

Conductor	36-20 AWG, solid or stranded round.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	2 to 150 insulated singles or twisted pairs or triads laid parallel in one plane, retained heat or film melt bonded section at random intervals from 1/8 to 100 in. apart, with or without PVC bands on one side of the cables in between the heat or film melt bonded sections. Width of heat or film melt bonded sections min. 1/8 inch Manufacturer shall maintain a record of all singles used in each cable. PVC film or polyester/PVC laminated film may be heat bonded on one side of cable.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits in electronic equipment (such as computers and business machines).