UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20658
                        
                            Issued:1990-08-24
                    
                            Revised:2012-07-30
                    
                            Style
                            20658
                        
                            Multiple Conductor Flat Cable with Extruded Non-integral Jacket.
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor38 AWG - 20 AWG solid or stranded round, silver or nickel copper. (Optional) Polyimide coating over the conductors.
		
			InsulationExtruded FEP, or extruded PTFE 3 mils min average.
		
			AssemblyTwo to 225 conductors laid parallel and in one plane. This forms a flat cable with a single row of conductors and adjacent conductors may touch.
		
			ShieldOptional. Aluminum faced polyester tape without drain wire.
		
			CoveringSeparator - (Optional) Extruded PTFE and/or FEP tape. Min 2 mils wall may be used between insulated cable and shield.
		
			JacketExtruded PVC, 30 mils min average, 24 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring and external wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20658	Issued:1990-08-24
			Revised:2012-07-30


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	38 AWG - 20 AWG solid or stranded round, silver or nickel copper. (Optional) Polyimide coating over the conductors.

Insulation	Extruded FEP, or extruded PTFE 3 mils min average.

Assembly	Two to 225 conductors laid parallel and in one plane. This forms a flat cable with a single row of conductors and adjacent conductors may touch.

Shield	Optional. Aluminum faced polyester tape without drain wire.

Covering	Separator - (Optional) Extruded PTFE and/or FEP tape. Min 2 mils wall may be used between insulated cable and shield.

Jacket	Extruded PVC, 30 mils min average, 24 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring and external wiring.