UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20661
                        
                            Issued:1990-09-10
                    
                            Revised:2013-03-06
                    
                            Style
                            20661
                        
                            Multiple-Conductor Cable Using Extruded or Non-Extruded Non-Integral Jacket
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG min., solid or stranded.
		
			InsulationSolid or cellular FRPE or PE or XLPE with POLYESTER or PVC adhesive, 3 mils minimum thickness at any point.
		
			AssemblyTwo to ten Insulated singles or groups of insulated singles laid parallel or twisted together.
		
			ShieldInner and outer shield are optional.
		
			JacketExtruded PTFE or FEP, ETFE, PVC or PFA with 2 mils minimum wall thickness at any point or PETP with a PVC or polyester adhesive, with 2 mils minimum wall thickness at any point.
		
			CoveringOptional, over jacket. Extruded PTFE, FEP, ETFE, PVC or PFA with 2 mils minimum wall thickness at any point, or PETP with a PVC or polyester adhesive (Milene) with 2 mils minimum wall thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits in electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20661	Issued:1990-09-10
			Revised:2013-03-06


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG min., solid or stranded.

Insulation	Solid or cellular FRPE or PE or XLPE with POLYESTER or PVC adhesive, 3 mils minimum thickness at any point.

Assembly	Two to ten Insulated singles or groups of insulated singles laid parallel or twisted together.

Shield	Inner and outer shield are optional.

Jacket	Extruded PTFE or FEP, ETFE, PVC or PFA with 2 mils minimum wall thickness at any point or PETP with a PVC or polyester adhesive, with 2 mils minimum wall thickness at any point.

Covering	Optional, over jacket. Extruded PTFE, FEP, ETFE, PVC or PFA with 2 mils minimum wall thickness at any point, or PETP with a PVC or polyester adhesive (Milene) with 2 mils minimum wall thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits in electronic equipment.