UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20667
                        
                            Issued:1990-11-27
                    
                            Revised:2012-04-24
                    
                            Style
                            20667
                        
                            Jacketed Cable.
                    
			Rating80 deg C, 300 Vac, Cable flame.
		
			Conductor0.5 mm sq to 2.0 mm sq, solid or stranded round, tinned or bare copper.
		
			InsulationEP, 22 mils min average, 20 mils minimum at any point.
		
			AssemblyTwo to ten individually insulated conductors or goups of insulated conductors cabled together to form a round cable. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			JacketPUR, dia. of 0.700 inches or less, 45 mils min average, 36 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20667	Issued:1990-11-27
			Revised:2012-04-24


Rating	80 deg C, 300 Vac, Cable flame.

Conductor	0.5 mm sq to 2.0 mm sq, solid or stranded round, tinned or bare copper.

Insulation	EP, 22 mils min average, 20 mils minimum at any point.

Assembly	Two to ten individually insulated conductors or goups of insulated conductors cabled together to form a round cable. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Jacket	PUR, dia. of 0.700 inches or less, 45 mils min average, 36 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment.